Omron STC-MCS500POE User Manual

No.18S111-03
37/70
STC-MBS500POE / STC-MCS500POE
Product Specifications and User’s Guide
Loading Camera Settings
Setting Procedure
1. Select “User Set X” (or Default) at “User Set Selector”
2. Execute “User Set Load”
Loading Camera Settings when Camera Power is on
Setting Procedure
1. Set “User Set X” or “Default” at “User Set Default”
Camera Settings Initialization
Please follow the procedure in below for camera settings put back to factory default settings.
Setting Procedure
1. Selects “Default” at “User Set Selector”.
2. Executes “User Set Load”.
3. Select “User Set X” at “User Set Selector”.
4. Executes “User Set Save”.
When executing “User Set Load”,
camera settings load from selected ROM
that was selected at “User Set Selector” to
register at RAM.
When the camera power is on,
camera settings load from selected ROM
that was selected at “User Set Default” to
register at RAM.
ROM
User Set 0 to 7
ROM
Default
Camera
Settings
User Set Selector
Selector
ROM
User Set 0 to 7
ROM
Default
Camera
Settings
User Set Selector
Selector

Omron STC-MCS500POE Specifications

General

Brand	Omron
Model	STC-MCS500POE
Category	Digital Camera
Language	English