Need help?Do you have a question about the Omron STC-MBE132POE and is the answer not in the manual?
General| Brand | Omron |
|---|---|
| Model | STC-MBE132POE |
| Category | Digital Camera |
| Language | English |
Explains graphic symbols and general warnings for safe camera operation.
Covers precautions for environment, installation, and wiring to prevent hazards.
Details safe usage, maintenance, repair, and disposal procedures for the camera.
Lists essential precautions for camera handling and outlines warranty information.
Introduces the GigE Vision cameras and their key features.
Details the electronic specifications of the monochrome and color CMOS PoE cameras.
Covers physical dimensions and environmental operating conditions for the cameras.
Details the pin assignment and LED status for the RJ45 Ethernet connector.
Explains the pinout and functions of the power and control signal connector.
Provides camera dimensions and describes sensor pixel transferring.
Describes normal mode, edge preset trigger mode, and trigger signal processing.
Covers saving, loading, and initializing camera settings using GenICam parameters.
Details frame rate, gain, exposure time, and black level settings for image acquisition.
Explains Auto Light Control, AGC, auto shutter, and white balance for image quality.
Covers gamma correction, ROI, pixel format, binning, and decimation.
Details trigger, flip, LUT, pixel correction, counter/timer, and event controls.
Lists GenICam commands for device information and image format settings.
Details commands for acquisition, analog gain, and auto luminance control.
Covers commands for LUT, digital I/O, logic blocks, and software signals.
Details commands for chunk data, action control, file access, and testing.
Explains GenICam commands related to the GigE transport layer and PTP.
To Next Page