No.19S185-01
43/68
STC-MBE132POE / STC-MCE132POE
Product Specifications and User’s Guide
White balance calculate region setting
The size and position for white balance gain calculation region are changeable.
GenICam Parameters
BalanceWhiteAuto
RegionSelector
IEnumeration Type White balance gain calculation region selection
Selection: Region 0
BalanceWhiteAuto
Width
IInteger Type Width (horizontal size, in pixel) for white balance gain calculation region
Range: 1 to 1,280
Default: 1,280
BalanceWhiteAuto
Height
IInteger Type Height (vertical size, in line) for white balance gain calculation region
Range: 1 to 1,024
Default: 1,024
BalanceWhiteAuto
XOffset
IInteger Type Horizontal offset (in pixel) for region 0
Range: 0 to 1,279
Default: 0
BalanceWhiteAuto
YOffset
IInteger Type Vertical offset (in line) for region 0
Range: 0 to 1,023
Default: 0
The white balance calculation region settings are like below:
BalanceWhite
AutoOffsetY
BalanceWhite
AutoHeight
BalanceWhite
AutoWidth
BalanceWhite
AutoOffsetX
White balance gain
calculation region 0
To Next Page
Loading...
Need help?
General
