No.19S185-01
62/68
STC-MBE132POE / STC-MCE132POE
Product Specifications and User’s Guide
11.10 EventControl
Name Description
EventSelector Selects which Event to signal to the host application.
EventNotification [EventSelector] Activate or deactivate the notification to the host application of the
occurrence of the selected Event.
EventTest Data Category that contains all the data features related to the Event Test
generated using the Test Event Generate command.
EventExposureStartData Category that contains all the data features related to the Exposure
Start Event.
EventExposureEndData Category that contains all the data features related to the Exposure
End Event.
EventFrameTriggerData Category that contains all the data features related to the Frame
Trigger Event.
EventFrameStartData Category that contains all the data features related to the Frame Start
Event.
EventFrameEndData Category that contains all the data features related to the Frame End
Event.
EventLine0RisingEdgeData Category that contains all the data features related to the Line0 Rising
Edge Event.
EventLine0FallingEdgeData Category that contains all the data features related to the Line0 Falling
Edge Event.
EventLine2RisingEdgeData Category that contains all the data features related to the Line2 Rising
Edge Event.
EventLine2FallingEdgeData Category that contains all the data features related to the Line2 Falling
Edge Event.
EventBlockDiscardData Category that contains all the data features related to the Block
Discard Event.
EventActionLateData Category that contains all the data features related to the Action Late
Event.
11.11 UserSetControl
Name Description
UserSetSelector Selects the feature User Set to load, save or configure.
UserSetLoad [UserSetSelector] Loads the User Set specified by User Set Selector to the device and
makes it active.
UseSetSave [UserSetSelector] Save the User Set specified by User Set Selector to the non-volatile
memory of the device.
UserSetDefault Selects the feature User Set to load and make active by default when
the device is reset.
To Next Page
Loading...
Need help?
General
