To Next PageTo Next Page
Need help?Do you have a question about the Omron STC-HD213DV and is the answer not in the manual?
General| Model | STC-HD213DV |
|---|---|
| Category | Digital Camera |
| Image Sensor | 1/3 inch progressive scan CMOS |
| Lens Mount | C-mount |
| Video Output | HD-SDI |
| Power Supply | DC12V |
| Scanning System | Progressive scan |
| Shutter Speed | 1/60 to 1/100, 000 sec |
| Field of View | Dependent on lens |
| Focus Range | Dependent on lens |
| White Balance | Auto |
| Exposure Control | Auto |
| Storage Temperature | -20°C to 60°C |
Explains graphic symbols and general warnings for safe camera operation.
Details precautions for operating, storing, and installing the camera safely.
Covers safety guidelines for camera usage, maintenance, and disposal procedures.
Guidelines for safe handling, operation, and environmental conditions for the camera.
Specifies the duration of the warranty and the conditions covered or excluded.
Details the primary capabilities and technical aspects of the cameras.
Explains the naming convention for different camera models.
Lists and describes optional accessories available for the cameras.
Covers image sensor, video output, and configurable camera functions.
Presents graphical data on the camera's response to different wavelengths of light.
Details the physical size, weight, and mounting options of the camera models.
Specifies operational temperature, humidity, vibration, and shock resistance.
Describes the wiring and circuit for external switch control via a 3.5mm jack.
Displays dimensional drawings and measurements for STC-HD213DV and STC-HD213DVN models.
Displays dimensional drawings and measurements for STC-HD213DV-CS and STC-HD213DVN-CS models.
Displays dimensional drawings and measurements for STC-HD213SDI and STC-HD213SDIN models.
Displays dimensional drawings and measurements for STC-HD213SDI-CS and STC-HD213SDIN-CS models.
How to adjust settings using the camera's physical push button.
Details camera operation using external switches and on-screen menus for various settings.
Covers system requirements and initial steps to use the control software.
Explains the software buttons, register differences, and functional descriptions for parameter adjustment.
Guides through configuring various camera settings like exposure, gain, white balance, and image adjustments.
Lists the configurable communication parameters such as baud rate and data bits.
Describes the structure and byte-level format for sending and receiving data.
Lists commands, data formats, slave addresses, and error codes for camera communication.
Maps registers for user presets, push button functions, and user-defined colors.
Details registers for UART, menu control, and other communication functions.
Maps registers for switch functions, line positions, and display controls.
Details registers for On-Screen Display (OSD) and test pattern selection.
Covers registers for digital zoom, firmware/FPGA versions, and defective pixel correction.
Maps registers for ALC, exposure time, frame rate, and resolution settings.
Details registers for gain control, white balance, and Auto White Balance (AWB) parameters.
Covers registers for gamma correction, image flipping, and photometry mode settings.
Maps registers for line markers, shadow masks, circle markers, pseudo colors, and color codes.
Details the structure and data fields for 2-byte OSCD commands.
Explains the format for sending multiple consecutive OSCD commands.
