To Next PageTo Next Page
Need help?Do you have a question about the Omron FS-C4KU7DGES-F and is the answer not in the manual?
General| Brand | Omron |
|---|---|
| Model | FS-C4KU7DGES-F |
| Category | Digital Camera |
| Language | English |
Details safety warnings and prohibitions related to environmental conditions, handling, and usage.
Provides safety warnings for correct installation, wiring, and handling of the camera.
Highlights key features of the GigE Vision Color Dual Lines CMOS Line Scanning PoE Camera.
Explains the naming convention used for different camera models and their specifications.
Details electrical parameters such as image sensor, resolution, line rate, and exposure time.
Provides physical dimensions, material, lens mount, and connector details for camera models.
Outlines operational and storage temperature, humidity, vibration, and shock resistance.
Describes the RJ45 Ethernet connector, including pin assignments and LED status indicators.
Details the power supply connector, its pin assignment, and voltage specifications.
Explains the IO signal connector, pin assignments for inputs/outputs, and signal types.
Provides detailed dimension drawings for FS-C4KU7DGES-F and FS-C2KU7DGES-F models.
Provides detailed dimension drawings for FS-C4KU7DGES-M42 and FS-C2KU7DGES-M42 models.
Provides detailed dimension drawings for the FS-C2KU7DGES-C model.
Explains the dual-line pixel array structure and line definition for image output.
Describes continuous image output operation without external triggers.
Explains image capture based on the duration of a trigger signal.
Details image capture based on the rising or falling edge of a preset trigger signal.
Covers trigger inputs during exposure or image output for advanced control.
Manages saving, loading, and initializing camera settings using GenICam parameters.
Configures frame rate, exposure time, and gain for image acquisition.
Covers white balance, image flip, ROI, and pixel format settings.
Details trigger sources, processing, and modes for image acquisition.
Corrects image non-uniformity due to lens or sensor characteristics.
Manages input and output signals via the 12-pin connector.
Manages time synchronization using PTP for network-based operations.
Commands for device type, version, serial number, and basic control.
Commands for configuring image sensor, format, acquisition mode, and trigger.
Controls analog gain, white balance, and digital I/O signals.
Configures timer, counter, and encoder functions.
Manages trigger logic and event notifications.
Manages user-defined settings and device file operations.
Configures GigE Vision transport layer and flat field correction.
