Omron FS-C4KU7DGES-F - Loading Camera Settings; Loading Camera Settings When Camera Power Is on; Camera Settings Initialization

No.20S046-00
31/62
FS-C4KU7DGES-F / FS-C4KU7DGES-M42 / FS-C2KU7DGES-F / FS-C2KU7DGES-M42 / FS-C2KU7DGES-C
Product Specifications and Use’s Guide
Loading Camera Settings
Setting Procedure
1. Select “User Set X” (or Default) at “User Set Selector”
2. Execute “User Set Load”
Loading Camera Settings when Camera Power is on
Setting Procedure
1. Set “UserSetX” or “Default” at “UserSetDefault”
Camera Settings Initialization
Please follow the procedure in below for camera settings put back to factory default settings.
Setting Procedure
1. Selects “Default” at “UserSetSelector”.
2. Executes “UserSetLoad”.
3. Select “UserSetX” at “UserSetSelector”.
4. Executes “UserSetSave”.
When executing “UserSetLoad”,
camera settings load from selected ROM
that was selected at “UserSetSelector” to
register at RAM.
When the camera power is on,
camera settings load from selected ROM
that was selected at “UserSetDefault” to
register at RAM.
ROM
UserSet0 to 7
ROM
Default
Camera
Settings
UserSetDefault
Selector
ROM
UserSet0 to 7
ROM
Default
Camera
Settings
UserSetSelector
Selector