EasyManua.ls Logo

Omron FS-C2KU7DGES-C

Omron FS-C2KU7DGES-C
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
No.20S046-00
1/62
FS-C4KU7DGES-F / FS-C4KU7DGES-M42 / FS-C2KU7DGES-F / FS-C2KU7DGES-M42 / FS-C2KU7DGES-C
Product Specifications and Use’s Guide
GigE Vision
Color Dual Lines CMOS Line Scanning
PoE Camera
FS-C4KU7DGES-F (4k Color 7.0 µm pixel size, F Mount)
FS-C4KU7DGES-M42 (4k Color 7.0 µm pixel size, M42 Mount)
FS-C2KU7DGES-F (2k Color 7.0 µm pixel size, F Mount)
FS-C2KU7DGES-M42 (2k Color 7.0 µm pixel size, M42 Mount)
FS-C2KU7DGES-C (2k Color 7.0 µm pixel size, C Mount)
Product Specifications and User’s Guide

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Omron FS-C2KU7DGES-C and is the answer not in the manual?

Omron FS-C2KU7DGES-C Specifications

General IconGeneral
BrandOmron
ModelFS-C2KU7DGES-C
CategoryDigital Camera
LanguageEnglish

Summary

General Safety Precautions

Product Precautions

Warranty Information

Details warranty period, coverage, and conditions for camera malfunctions.

Camera Specifications

Electronic Specifications

Details technical specifications like sensor, resolution, rates, and interfaces.

Mechanical Specifications

Outlines physical dimensions, materials, and connector types of the cameras.

Environmental Specifications

Specifies operational and storage temperature, humidity, vibration, and shock resistance.

Connector Specifications

Ethernet Connector

Details the RJ45 Ethernet connector, including pin assignments and LED status.

Power Supply Connector

Describes the power supply connector, its pin assignment, and voltage specifications.

IO Signal Connector

Details the IO signal connector, pin assignments for input/output signals.

Input Signal Circuit

Explains the input signal circuits for RS-422 and TTL signals.

Output Signal Circuit

Details the output signal circuits for RS-422 and TTL signals.

Camera Dimensions

Camera Operational Modes

Camera Functions

Save and Load Camera Settings

Manages camera settings, including saving, loading, and initialization.

Frame Rate and Exposure Control

Configures camera frame rates and adjusts variable exposure times.

Gain and White Balance

Controls analog/digital gain and white balance for optimal image color and brightness.

Flat Field Correction (FFC)

Corrects image brightness non-uniformity caused by lens or sensor.

GenICam Command List

Acquisition Control Commands

Commands for managing the image acquisition process, including mode and triggers.

Related product manuals