Omron Gentle Temp 521 - Using the Memory Function

3. Using the Unit
11
EN
3.2
Using the Memory Function
This unit automatically stores the results up to 25 sets after each measurement.
Note: If the memory is full, the unit will delete the oldest reading.
1. Press the ON/MEM button to turn on the unit.
2. Press the ON/MEM button again.
The memory number appears on the display.
3. Release the ON/MEM button.
The most recent result will appear on the display.
Press the ON/MEM button repeatedly to view the older results.
4. Press and hold the ON/MEM button until “OFF” appears on the display to
turn off the unit.
It will automatically turn off after 1 minute.