Total Counter/Time Counter (DIN 48 x 24) H7GP 7
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Panel Cutouts
With Flush Mounting Bracket
Terminal cover (provided)
Panel
M3.5 terminal screw
H7GP-C
H7GP-T
Y92S-32 rubber
packing (provided)
Y92F-32 flush mounting
adaptor (provided)
Panel cutouts are as shown below
(according to DIN43700).
Note: 1. The mounting panel thick-
ness should be 1 to 6 mm.
2. Water resistance will
be lost if Counters are
mounted side-by-side.
To Next Page
Loading...
