To Next PageTo Next Page
Need help?Do you have a question about the Omron H7BX and is the answer not in the manual?
General| Brand | Omron |
|---|---|
| Model | H7BX |
| Category | Cash Counter |
| Language | English |
Details available models based on power supply and output type.
Lists separately orderable accessories for the H7BX counter.
Details the electrical ratings, power supply voltage, and operating voltage range.
Covers insulation, dielectric strength, impulse voltage, noise, static, vibration, and shock resistance.
Details mechanical/electrical life expectancy and product weight.
Lists safety and EMC standards the product complies with.
Explains input and output operations when the device functions as a counter.
Details input and output operations when the device functions as a tachometer.
Describes the key protection feature for preventing unintended operations.
Shows terminal layouts for different H7BX models.
Illustrates the internal functional blocks of the counter.
Details input circuit configurations for various signal types.
Explains NPN input connections and signal levels.
Details PNP input connections and signal levels.
Specifies requirements for two-wire sensors used as inputs.
Identifies and explains the indicators, keys, and switches on the device.
Provides physical dimensions and panel cutout information.
Lists and describes optional accessories like covers.
Guides on setting up the counter functions using DIP switch and keys.
Guides on setting up tachometer functions using DIP switch and keys.
Explains basic counter settings using the DIP switch.
Describes how to select counter modes like Total, Batch, Dual, Twin.
Setting the input signal type (UP, DOWN, etc.) for counter operations.
Configuring output behavior and one-shot output times.
Adjusting counting speed and converting input pulses to desired units.
Defining decimal placement and NPN/PNP input selection.
Setting display color and key protection levels.
Configuring output inversion and enabling memory backup.
Enabling H7AN compatibility and allocating output signals.
Setting and monitoring output ON count and cumulative run time alarms.
Details input modes and output mode settings for counters.
Explains one-shot times, counting speed, and reset signal width.
Covers prescale value, decimal point, and display color settings.
Explains averaging methods and auto-zero/startup time.
Covers absolute/forecast value settings, upper limits, and batch count limits.
Details output allocation, key protection, and output inversion.
Explains memory backup and H7AN compatibility functions.
Covers ON count and cumulative run time alarms/monitors.
Explains I/O functions for various counter modes in run mode.
Details the UP mode input and present value behavior.
Details the DOWN mode input and present value behavior.
Details command and quadrature input modes for UP/DOWN counting.
Details individual input modes for UP/DOWN counting.
Explains H/L symbols for input signal levels.
Illustrates I/O functions for N and F output modes in counter operation.
Illustrates I/O functions for C and R output modes in counter operation.
Illustrates I/O functions for K-1 and P output modes in counter operation.
Illustrates I/O functions for Q and A output modes in counter operation.
Illustrates I/O functions for K-2, D, L, H output modes in counter operation.
Explains how the total counter works with the preset counter.
Details the operation of the batch counter function.
Describes how the dual counter adds or subtracts counts.
Lists how reset operations affect different counter functions.
Guides on switching the device mode from counter to tachometer.
Explains basic tachometer settings using the DIP switch.
Setting tachometer input and output modes.
Adjusting counting speed and setting decimal point position.
Setting prescale value and averaging methods.
Configuring average processing and auto-zero/startup times.
Setting NPN/PNP input, peak/bottom hold, and output hysteresis.
Configuring output delay, set value limits, and display color.
Setting key protection levels and logical inversion for outputs.
Setting and monitoring output ON count and cumulative run time alarms.
Details tachometer input modes like 1 input, 2 inputs, error, ratio.
Explains tachometer output modes like HI-LO, AREA, HI-HI, LO-LO.
Covers counting speed, prescale value, and unit display for tachometers.
Explains averaging methods, auto-zero, and startup time.
Details peak/bottom hold, output hysteresis, and OFF delay functions.
Covers output allocation, key protection, and output inversion.
Explains pulse measurement, alarms, and monitors for tachometers.
Shows how measurement values and set values are displayed in run mode.
Displays peak and bottom hold values during tachometer operation.
Illustrates output behavior for tachometer modes like HI-LO, AREA, HI-HI, LO-LO.
Guides on selecting the operating configuration of the H7BX.
Function to confirm DIP switch settings via the front display.
Details key protection levels and their effects on operation.
Displays error codes and correction methods for self-diagnosis.
General safety guidelines for operation and environment.
Guidelines for connecting power supply and installing the device.
Precautions for handling the device and wiring terminals.
Specific advice for correct operation and usage, including power supply.
Legal terms and conditions related to the product, warranty, and liability.
