Omron H7BX-A User Manual

Multifunction Counter H7BX 7
Nomenclature
Dimensions (Unit: mm)
■ Counter
● Counter
● Dimensions with Flush Mounting Adapter
■ Accessories (Order Separately)
O
M
R
O
N
C
o
r
p
o
r
a
t
i
o
n
C
O
U
N
T
E
R
H
7
B
X
-
A
M
A
DE
IN
C
H
IN
A
L
o
t
N
o
.
X
X
X
X
X
X
1
OFF
ON
2345678
A
B
C
D
E
K
I
L
F
G
H
J
1 6
to
Indicators
A Reset Indicator (Orange)
B Key Protection Indicator (Orange)
C Control Output Indicator (Orange)
F Total Count Indicator (Green)
H Set Value 1 and 2 Stage Indicators (Green)
OUT: One stage
OUT1, OUT2: Two stages
Lit when the total count value is displayed.
Lit when the reset input (1) or reset key is ON.
G Batch Indicator (Green)
Lit when the batch count value is displayed.
Operation Keys
I Mode Key
Used to switch mode and setting items.
J Reset Key
K Up Keys:
Switches
L DIP Switch
E Set Value (Sub-display)
D Present Value (Main Display)
Character height: 13.5 mm (Red/green selectable)
Character height: 9 mm (Green)
67.6 × 67.6
M3.5 terminal screw
(effective length: 6 mm)
72
72
100
6
Note: M3.5 terminal screws
(effective length: 6 mm).
H7BX-A@@
72
72
69 × 69
M3.5 terminal screw
(effective length: 6 mm)
102
5 + panel thickness
Panel
6
H7BX-A@@
(The flush mounting adapter is supplied with the H7BX.)
Panel Cutouts
Panel cutouts are as shown below
(according to DIN 43700).
82 min.
100 min.
68
+0.7
−0
68
+0.7
−0
Note: The mounting panel thickness
must be 1 to 5 mm.
●
S
o
f
t
C
over
Y92A-72F1
● Terminal Cover (See note.)
Y92A-72T
(VDE0106/T100)
Product Protection for Use in
Environments Subject to Water or Oil
The panel surface has a protective
structure so that the internal circuits will
not be adversely affected if drops of water
penetrate the gaps between the keys. If,
however, there is a possibility of water or
oil being present on the operator's hands,
mount the optional Soft Cover.
The Soft Cover ensures protection
equivalent to IP54. Do not, however, use
the H7BX in locations where it would come
into direct contact with oil.
Note: Depending on the operating environment,
the condition of resin parts may
deteriorate, and may shrink or harden.
Therefore, it is recommended that resin
parts are replaced regularly.
● Hard
Cover
Y92A-72
Note: Supplied with the
H7BX.

Omron H7BX-A Specifications

General

Brand	Omron
Model	H7BX-A
Category	Cash Counter
Language	English