H7CC-A@
40
Key Protect Level
It is possible to prevent setting errors by prohibiting the use of certain operation keys by specifying the key protect level (KP-1 to KP-7) when the
key-protect switch is set to ON. The key protect level is set in the function setting mode.
The key protect indicator is lit when the key-protect switch is ON.
* Changing mode to configuration selection mode or function setting mode.
Level Description
Details
Changing modes*
Switching display
during operation
Reset operation Up/Down Keys
KP-1
(default setting)
Invalid Valid Valid Valid
KP-2 Invalid Valid Invalid Valid
KP-3 Invalid Valid Valid Invalid
KP-4 Invalid Valid Invalid Invalid
KP-5 Invalid Invalid Invalid Invalid
KP-6 Invalid Invalid Valid Valid
KP-7 Invalid Invalid Invalid Valid
*
* Factory-set to OFF
ON
(Enable)
OFF
(Disable)
Key protect
To Next Page
Loading...
Need help?
General
