Omron H7CC-A Series - H7 CC-R; Precautions on Replacing the AMD-S; Terminal Arrangement and Wiring Connections; Setting Procedure

H7CC-R@
60
Precautions on Replacing the AMD-S
Terminal Arrangement and Wiring Connections
Note: 1. Wiring must be changed from an 8-pin socket to an 11-pin socket.
2. Take into consideration the length of the wires and the terminal numbers.
3. Order the P2CF-11Connecting Socket separately.
Setting Procedure
Perform the following settings to achieve the functions of the AMD-S
using the H7CC-R11@.
Operation Key Settings
Note: The characters displayed in reverse video are the default
settings.
Characteristics
* When set to AMD mode.
The H7CC-R11 is the recommended model for replacing the AMD-S-series Motion Detector. Refer to the following precautions before
replacing the AMD-S.
AMD-S H7CC-R11@
3456
2187
Sensor
Tc Ta
Relay output
100/110 VAC
(200/220 VAC)
Tb
8PFA
Black (white)
Brown (red)
Blue (black)
• Connection Sockets: 8PFA
5
4
678
2
3
11110
9
HOLD HOLD
Tb Ta
Relay output
100 to 240 VAC
Tc
P2CF-11
Black (white)
Brown (red)
Blue
(black)
Sensor
• Connection Sockets: P2CF-11
Model
AMD-S
H7CC-R11@
Item Parameters Setting range
Set
value
Measuring
ranges
0.01 to 0.1 s
(AMD-S@1),
0.1 to 1 s
(AMD-S@2),
1 to 10 s
(AMD-S@3)
---
Output
mode
Rotation increase
detection
(AMD-SU@)
---
Rotation decrease
detection
(AMD-SL@)
---
Average
processing
None ---
Input mode Voltage Input ---
Startup
time
Fixed (0.1 to 10 s)
cnts
（CNTS）
10ms
1ms
totm
（TOTM）
Lower
limit
Upper
limit
avgn
（AVGN）
OFF
imod
（IMOD）
PNP
stmr
（STMR）
〜
（99.9s）（0.0s）
0.0
Model
AMD-S H7CC-R11@
Item
Supply voltage
−100 to 110 VAC
−200 to 220 VAC
−100 to 240 VAC
Input method
Voltage input (high: 4 to 14 V,
low: 0 to 1 V)
No-voltage input/voltage
input (high: 4.5 to 30 V,
low: 0 to 2 V)
External power
supply
12 VDC ±1 V, 12 mA
12 VDC (±10%),
100 mA
Relay output 5 A at 200 VAC (resistive load)
3 A at 250 VAC/30 VDC
(resistive load)
Output mode
Rotation increase (AMD-SU@)
Rotation decrease (AMD-SL@)
HI-LO, AREA, HI-HI, LO-
LO
Setting method Input pulse interval (s) Input pulse interval (s) *
Detection
rotation rate
range
6 to 6,000 rpm
(for 1 pulse/rotation)
0.00006 to 20,000 rpm *
(for 1 pulse/rotation)
Startup time
Always from 0.1 to 10 s
(Always 10 s if not specified.)
Setting range: 0.0 to
99.9 s
Life expectancy
Output relay electrical
operations of 500,000 min.
Output relay electrical
operations of 100,000
min.
Memory backup None
Non-volatile memory
(overwrites: 100,000
times min.)