Omron H7CC-A Series User Manual

H7CC-R@
47
Dimensions (Unit: mm)
Tachometers
63.7
14.4
6
48 × 48
44.8 × 44.8
Dimensions without Flush Mounting Adapter
H7CC-R@
Note: 1. The mounting panel thickness should be 1
to 5 mm.
2. To allow easier operation, it is
recommended that Adapters be mounted so
that the gap between sides with hooks is at
least 15 mm (i.e., with the panel cutouts
separated by at least 60 mm).
3. It is possible to horizontally mount Timers
side by side. Attach the Flush Mounting
Adapters so that the surfaces without hooks
are on the sides of the Timers. If Counters/
Tachometers are mounted side by side,
however, water resistance will be lost.
60 min.
60 min.
15 min.
45
+0.6
−0
45
+0.6
−0
n side by side mounting
A
With Y92A-48F1 attached.
With Y92A-48 attached.
A=(48n−2.5)
+1
−0
A=(51n−5.5)
+1
−0
A={48n−2.5+(n−1)×4}
+1
−0
Panel Cutouts
Panel cutouts are as shown below
(according to DIN43700).
(51)
7.5 89.9
58
48
Dimensions with Flush Mounting Adapter
(Adapter and Waterproof Packing Ordered Separately)
H7CC-R@
Dimensions with Front Connecting Socket
H7CC-R@
H7CC-R@
P2CF-11(-E) (order separately)
Front Connecting Socket
100.9
103.2 *
* These dimensions vary with the kind of DIN track
(reference value).

Omron H7CC-A Series Specifications

General

Brand	Omron
Model	H7CC-A Series
Category	Measuring Instruments
Language	English