Omron H7EC - Page 120

C-126
Multifunction Preset Counter
H7CX
Tachometer Operation
Note: 1.
All setting changes are performed using the key.
2.
For details, refer to page 118.
1
+
1
+
Power ON
Run mode
1 s min.
1 s min.
3 s min.
3 s min.
Measurement value
Tachometer output mode
Counting speed
Decimal point position
Prescale value
Average processing
Auto-zero time
Startup time
NPN/PNP input mode
Display color
Key protect level
Configuration selection mode
Configuration selection
DIP switch monitor
Counting stopped
Counting possible
Function setting mode
Output allocation
Measurement value,
OUT1 set value
Measurement value,
OUT2 set value