Omron H7EC - Page 60

C-66
Preset Counter/Timer
H8GN
Nomenclature
CMW
RST
OUT
TOTAL
Operation display 2
5 h 30 min
123.4 s
Level Key Mode Key
Down Key
Up/Reset Key
Indicator Meaning
Lit when communications writing is enabled.
Lit during reset using reset input or Reset Key.
Lit when control output is ON.
Lit when totalizing count value is displayed.
Example
No. 1 Display
Displays the present value or parameter type.
When totalizing count is displayed, the
leftmost 4 digits of the 8-digit totalizing count
will be displayed. (Zeros suppressed)
Operation display 1
Displays the time unit when the
timer function has been selected.
Flashes while timer is on 0.0 min,
0 h 00 min, 0.0 h, or 0 h.
Press this key to select the setup
level. The setup level is selected in
order "operation level" ←→
"adjustment level", "initial setting
level" ←→ "communications setting
level".
Press this key to select
parameters within each
level.
Each press of this key decreases
values displayed on the No. 2
display. Hold down this key
continuously to decrease values
quickly. Also returns setting
items.
Each press of this key
increases values
displayed on the No. 2
display. Hold down this
key continuously to
increase values quickly.
Also advances setting
items.
Reset Function
To reset the present
value, press this key
while the present value
is displayed.
If this key is pressed
while the totalizing
count value is
displayed, the totalizing
count value and the
present value will be
reset.
No. 2 Display
Displays set value or
set value of the
parameter.
Displays the
rightmost 4 digits of
the count value (8
digits) when the
H8GN is used as a
totalizing counter.
(Zeros suppressed)