Preset Counter/Timer
H8GN
C-79
Counters
+
/
: -.---s
: ----h
: ---.-h
: --h--min
: ---.-min
: --min--s
: ----s
: ---.-s
+
Adjustment level
Cycle time
SV 3
SV 2
SV 1
SV 0
See note 1.
See note 1.
See note 1.
See note 1.
See note 1.
Key for more than set time (The default setting is 3 s.)
Key for 1 s. min.
Protect level
Communications setting level
Baud rate
Stop bits
Parity
: 0 to 99
Note: 1. Counter (increment or decrement)
: −999 to 9999
Counter (individual or quadrature)
Timer (cycle time or mode other than output mode Z)
: 0 to 9999
Timer (output mode Z)
: 0% to 100% (ON duty)
2. Time range
: --.--s (default)
Models with
communications
Commu-
nications
writing
: Enabled
: Disabled
When using
SV-bank
When timer
output mode
Z is selected
: Level 0
: Level 1
: Level 2
: Level 3
: Level 0
: Level 1
: Level 2
Operation/
adjustment
protection
Initial
settings/
commu-
nications
protection
: No key-operated
setting changes
: Key-operated setting
changes allowed
Setting
changes
protection
: Reset Key disabled
: Reset Key enabled
Reset Key
protect
: 0.000 to 9.999 s
: 0.00 to 99.99 s
: 0.0 to 999.9s, min, h
: 0 to 9999 s, h
: 0 min 00 s to 99 min 59 s
: 0 h 00 min to 99 h 59 min
3. Displayed when level 0 is selected for initial setting/
communications protection in the protect level.
Commu-
nications
Unit No.
Data
length
Models with
communications
: 1,200 bps
: 2,400 bps
: 4,800 bps
: 9,600 bps
: 7 bits
: 8 bits
: 1 bit
: 2 bits
: None
: Even
: Odd
Note : Settings made in the communications
setting level are enabled when the power
is turned ON again.
To Next Page
Loading...
