C-84
Preset Counter/Timer
H8GN
Additional Information
■
Parameters List
Fill in your set values in the
Set value
column of the following tables and utilize the tables for quick reference.
Protect Level
Operation Level
Parameter name Parameter Setting range Default
value
Unit Set value
Operation/Adjustment Protection oapt 0 to 30
Initial Setting/Communications Pro-
tection
icpt 0 to 21
Setting Change Protection wtpt on/off off
Reset Key Protection rpt on/off off
Parameter name Parameter Setting (display) range Default
value
Unit Set value
Present val-
ue (PV)/
Set Value
(SV)
PV Counter -999 to 9999/---- (PV<-999) 0
Timer 0.000 to 9.999 (Time range=-.---s) 0.000 Second
0.00 to 99.99 (Time range=--.--s) 0.00 Second
0.0 to 999.9 (Time range=---.-s) 0.0 Second
0 to 9999 (Time range=----s) 0 Second
0:00 to 99:59 (Time range=--min--s) 0:00 Minute:
Second
0.0 to 999.9 (Time range=---.-min) 0.0 Minute
0:00 to 99:59 (Time range=--h--min) 0:00 Hour:
Minute
0.0 to 999.9 (Time range=---.-h) 0.0 Hour
0 to 9999 (Time range=----h) 0 Hour
SV Counter 0 to 9999 (Input mode=Up or Down) 0
-999 to 9999 (Input mode=Individual or quadrature) 0
Timer (Out-
put mode:
A, B, D, E,
F)
0.000 to 9.999 (Time range=-.---s) 0.000 Second
0.00 to 99.99 (Time range=--.--s) 0.00 Second
0.0 to 999.9 (Time range=---.-s) 0.0 Second
0 to 9999 (Time range=----s) 0 Second
0:00 to 99:59 (Time range=--min--s) 0:00 Minute:
Second
0.00 to 999.9 (Time range=---.-min) 0.0 Minute
0:00 to 99:59 (Time range=--h--min) 0:00 Hour:
Minute
0.00 to 999.9 (Time range=---.-h) 0.0 Hour
0 to 9999 (Time range=----h) 0 Hour
Timer (Out-
put mode:
Z)
0 to 100 0 %
PV Same as for PV in the above PV/SV column.
Totalizing count value 0 to 99999999 0
SV-bank m-sp 0/1/2/30