Omron HEM-432C User Manual

USING THE MEMORY FUNCTION
16
Every time you complete a measurement the monitor stores the blood
pressure and pulse rate in the memory. The Blood Pressure Monitor
automatically stores up to 30 measurement values. When 30 sets of
measurement values are stored in the memory, the oldest record is
deleted to save the most recent measurement values.
AVERAGING FUNCTION
The monitor also calculates an average reading based on the values of
the three most recent measurements that were taken within 10 minutes
of the most recent reading.
NOTES:
• If only two readings are stored in the memory for the 10-minute
period, the average is based on the two readings.
• If one reading is stored in the memory for the 10-minute period,
this reading is displayed as the average.
If the date and time is not set, the measurement values and the average
value will not be stored in the memory correctly.
TO DISPLAY THE AVERAGE VALUE
Average Value Symbol
1.
Press the ON/OFF button to turn the power on.
2.
Press the MEMORY button.
The average value symbol will display on the screen with the
average reading.
FINAL.HEM-432CN2-IM 2/23/10 10:56 AM Page 16

Omron HEM-432C Specifications

Measurement Specifications

pressure measurement range	0 - 280 mmHg
pulse measurement range	40 - 200/minute
pressure accuracy	±3 mmHg or 2 % of reading
pulse accuracy	±5% of reading

Operating Environment

operating temperature	50°F to 104°F (10°C to 40°C)
operating humidity	30 to 85% RH maximum
storage temperature	-4°F to 140°F (-20°C to 60°C)
storage humidity	10 to 95% RH maximum

Power

power source	4 “AAA” batteries
battery usage	Approx. 300 usages

Weight and Dimensions

unit weight	1.0 lbs
unit dimensions	5.13" x 3.5" x 6.88"
master weight	14.25 lbs
master dimensions	22" x 11" x 8.25"
monitor weight	Approximately 8 oz (225 g)
cuff size	Approximately 5 1/2" x 18 7/8" (140 mm x 480 mm)
cuff circumference	9" to 13" (229 mm x 330 mm)