Omron HEM-432C User Manual

CARE AND MAINTENANCE
18
To keep your digital blood pressure monitor in the best condition and
protect the unit from damage follow the directions listed below:
Do not forcefully bend the arm cuff or air tube. Do not fold tightly.
Clean the monitor with a soft dry cloth. Do not use any abrasive or
volatile cleaners. Do not attempt to clean the cuff. Never immerse the
monitor or any components in water.
Store the monitor in a safe and dry location. Do not subject the monitor
to extreme hot or cold temperatures, humidity and direct sunlight.
Avoid subjecting the monitor to strong shocks, such as dropping the unit
on the floor.
Remove the batteries if the unit will not be used for three months or
longer. Always replace all the batteries with new ones at the same time.
Use the unit consistent with the instruction provided in this manual.
Use only authorized parts and accessories.
FINAL.HEM-432CN2-IM 2/23/10 10:56 AM Page 18

Omron HEM-432C Specifications

Measurement Specifications

pressure measurement range	0 - 280 mmHg
pulse measurement range	40 - 200/minute
pressure accuracy	±3 mmHg or 2 % of reading
pulse accuracy	±5% of reading

Operating Environment

operating temperature	50°F to 104°F (10°C to 40°C)
operating humidity	30 to 85% RH maximum
storage temperature	-4°F to 140°F (-20°C to 60°C)
storage humidity	10 to 95% RH maximum

Power

power source	4 “AAA” batteries
battery usage	Approx. 300 usages

Weight and Dimensions

unit weight	1.0 lbs
unit dimensions	5.13" x 3.5" x 6.88"
master weight	14.25 lbs
master dimensions	22" x 11" x 8.25"
monitor weight	Approximately 8 oz (225 g)
cuff size	Approximately 5 1/2" x 18 7/8" (140 mm x 480 mm)
cuff circumference	9" to 13" (229 mm x 330 mm)