50
USING THE MEMORY FUNCTION
TO DELETE ALL VALUES STORED IN THE MEMORY
You cannot partially delete measurement values stored in the memory.
All values will be deleted.
1. Press the START/STOP button
to turn the power off, then press the SET button.
Continue to press the SET button until the
Delete Data Screen displays.
2. Select YES or NO.
NOTE: The DELETE DATA SETTING
automatically defaults to ( ) NO after
deleting the measurement values stored
in the memory.
Press the ( ) button to change the Delete Data
Setting to YES.
Press the SET button.
ARE YOU SURE? displays on the screen.
All Memory
Erasure Screen
Are You Sure
YES Screen
All Memory
Erasure YES Screen
To Next Page
Loading...
