19
3. Using the Unit
To View the Readings Stored in Memory
1. Press the button, while the average value is displayed.
The Memory number appears
for a second before the pulse
rate is displayed. The newest
set is numbered “1”.
2. Press the or button to view the readings stored in
memory.
: To the older readings
: To the more recent readings
To delete all the values stored in memory
When the memory symbol ( ) appears, first press the
Memory button. Then while holding it down, press the
START/STOP button simultaneously for about 2-3 seconds.
Note: You cannot partially delete the values stored in the memory.
Alternating date/
time display
HEM-7221-C1_C_M.book Page 19 Monday, November 22, 2010 1:19 PM
To Next Page
Loading...
