24
3.Using the Unit
2. While the average value is displayed,
press the Memory button ( ) again.
The result from the most
recent measurement is
displayed.
The Memory number appears
for a second before the pulse
rate is displayed.
The newest set is numbered
“1”.
The date and time are
alternately displayed.
Note: If your systolic or diastolic pressure
is outside the standard range, the
heartbeat symbol will blink when
the measurement result is
displayed. Refer to section 3.3.
HEM-7300-C3_B_M.fm Page 24 Tuesday, March 9, 2010 10:17 AM
To Next Page
Loading...
