25
3.Using the Unit
3. Press the Memory button ( ) repeatedly
to cycle through the previous
measurement results.
Keep the button pressed down to cycle
rapidly through the previous results.
If the irregular heartbeat symbol was
displayed at the time of a measurement,
this is displayed when that result is
displayed.
4. Press the START/STOP button to turn the unit off.
If you forget to turn the unit off, it will automatically shut itself
off after two minutes.
HEM-7300-C3_B_M.fm Page 25 Tuesday, March 9, 2010 10:17 AM
To Next Page
Loading...
