EasyManua.ls Logo

Omron HV-F 128 User Manual

Omron HV-F 128
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
How to use TENS device (Omron HV-F 128)
Info and figures are selected from the public access website:
https://www.omronhealthcare-ap.com/Content/uploads/products/
355bb601fa1d40f4a15ecba67cfa3bbf.pdf
How to Insert Batteries
1. Turn the Intensity Adjustment Dial/Power Switch to the “OFF” position.
2. Open the battery cover on the back of the main unit.
3. Insert batteries according to the polarities shown in the battery compartment.
4. Close the battery cover.
General advice on the handling of batteries
The supplied batteries are prepared for this study only.
Insert the batteries with the polarities (+ and ) in correct alignment.
Battery Life is approx. 3 months: when used 15 minutes a day continuously.
If you feel the massage stimulation is weak, the batteries may be worn. Replace the
batteries with new ones.
Figure 1
A
B
Question and Answer IconNeed help?

Do you have a question about the Omron HV-F 128 and is the answer not in the manual?

Omron HV-F 128 Specifications

General IconGeneral
TypeTENS Unit
Treatment AreasShoulder, Leg, Arm, Joint, Back
Usage Time15 minutes
WeightApprox. 100g (without batteries)
Dimensions60mm x 199mm x 21mm

Summary

Battery Insertion and Handling

How to Insert Batteries

Step-by-step guide for inserting batteries into the TENS device.

General Advice on Battery Handling

Important tips for battery life and performance, including replacement.

Electrode Cord and Pad Connection

How to Connect the Electrode Cord

Instructions for connecting the electrode cord to the main unit and pads.

Using the Unit for the First Time

Initial preparation steps before applying the electrode pads for the first time.

How to Attach the Pad to the Skin

Detailed guidance on applying electrode pads to the skin correctly and securely.

General Advice on Pad Handling

Best practices for pad usage, care, and troubleshooting adhesion issues.

Applying Electrical Stimulation

How to Apply Electrical Stimulation

Steps for turning on the device and starting electrical stimulation.

Select Stimulation Method

Guidance on choosing and setting specific stimulation modes and parameters.

Stimulation Adjustment and Session End

Adjust the Intensity of Stimulation

How to adjust stimulation levels for optimal and comfortable electrotherapy.

Advice on Intensity Adjustment

Recommendations for managing discomfort and ensuring effective stimulation levels.

End of Stimulation

Procedure for safely turning off the device and removing components after use.

Store the Unit

Instructions for properly storing the TENS device and its accessories.

Maintenance, Troubleshooting, and Support

Advice on Maintenance of Pads

Guidance on pad lifespan, cleaning, and replacement.

How to Clean the Unit

Steps for safely cleaning the TENS device main unit.

Troubleshooting

Information on common issues and how to resolve them.

Live and Video Tutorial

Resources for further learning and practical demonstrations.

Related product manuals