Why is nothing printing from my Omron INTELLISENSE HEM-705CP Blood Pressure Monitor?
Nothing may be printing because the printer cable plug is not connected properly or is damaged. Connect it correctly; reference p.10. Contact Omron Customer Service.
What to do if the Omron INTELLISENSE HEM-705CP Blood Pressure Monitor has no readings stored?
If there are no readings stored, take a measurement and then print.
How to fix under-inflated cuff on Omron INTELLISENSE HEM-705CP?
If the cuff is under-inflated on your Omron Blood Pressure Monitor, remove the arm cuff, read the 'Taking a Measurement' instructions on page 14, wait 2-3 minutes, and then take another measurement.
What to do if the Omron INTELLISENSE HEM-705CP Blood Pressure Monitor cuff is under-inflated?
If the cuff is under-inflated, turn the monitor off, wait 2-3 minutes, and take another measurement, repeating the steps under "How to Take a Reading". If "EE" is displayed again, take another measurement by pressing and holding the START button as shown on instruction page 12 under "How to Take a Reading", instructions for special conditions. The cuff may be wrapped too tightly around your arm.
Why is the power/operation light blinking and the Omron INTELLISENSE HEM-705CP stopped printing?
The power/operation light may be blinking, and the printing may have stopped because the batteries are worn. Replace them with new batteries.
What to do if the Omron INTELLISENSE HEM-705CP cuff is over-inflated?
If the cuff is over-inflated (more than 300 mmHg), turn the monitor off and carefully repeat the steps listed under "How to Take a Reading."
What to do if no printer paper comes out of my Omron Blood Pressure Monitor?
If no printer paper comes out, this can be caused by no printer paper being installed, the printer paper being jammed, or running out of printer paper. Remove jammed paper from the printer and reinstall it, or purchase new printer paper.
What to do if the Omron INTELLISENSE HEM-705CP Blood Pressure Monitor battery voltage is excessively low?
If the battery voltage is excessively low, replace all four "AA" batteries with new batteries.
What to do if the printer paper is not installed correctly in Omron INTELLISENSE HEM-705CP?
If the printer paper is not installed correctly, install it correctly.
What to do if Omron INTELLISENSE HEM-705CP batteries are worn?
If the batteries of your Omron Blood Pressure Monitor are worn, replace all four batteries. See page 7 of the manual for instructions on battery installation.
Emphasizes not to self-diagnose or self-treat, and to follow doctor's instructions.
Lists critical safety guidelines like not using on infants, not disassembling, and battery handling.
Details the correct procedure for fitting and applying the arm cuff to the user's arm.
Describes how to ensure the cuff is snug and properly positioned for accurate readings.
Explains the steps involved in taking a blood pressure reading with the monitor.
Covers instructions for special conditions, like high systolic pressure or stopping a measurement.
Lists common error indicators for the main unit and their causes and corrections.
Lists common error indicators for the printer unit and their causes and corrections.
General| Brand | Omron |
|---|---|
| Model | INTELLISENSE HEM-705CP |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page