What to do if Omron IntelliSense HEM-773AC Blood Pressure Monitor displays error due to low battery?
If your Omron Blood Pressure Monitor shows an error related to low battery voltage, the solution is to replace all four AA batteries with a set of new ones. This should resolve the issue.
What to do if Omron IntelliSense HEM-773AC cuff over-inflated?
If the cuff on your Omron Blood Pressure Monitor over-inflates (more than 280 mmHg), turn the monitor off. Carefully read and repeat the steps listed under “How to Take a Reading.”
What to do if Omron Blood Pressure Monitor cuff under-inflated?
If your Omron Blood Pressure Monitor cuff is under-inflated: * Turn the monitor off. * Wait 2-3 minutes before taking another measurement (some users may require a longer waiting period). * Repeat the steps listed under “How to Take a Reading.” If “EE” is still displayed, take another measurement by pressing and holding the START button as shown on instruction page 13 under “Instructions for special conditions.” Also, ensure that your cuff is not wrapped too tightly around your arm.
General| Brand | Omron |
|---|---|
| Model | IntelliSense HEM-773AC |
| Category | Blood Pressure Monitor |
| Language | English |
Details important safety warnings, cautions, and handling advice to prevent harm or damage.
Identification and description of the main unit's parts, buttons, and display elements.
Overview of all components provided with the blood pressure monitor, such as the cuff and AC adapter.
Instructions for preparing and initially placing the arm cuff on the upper arm (steps 1-5).
Instructions for securing the cuff firmly and positioning the arm for measurement (steps 6-9).
Steps to prepare the monitor and select the user before starting a blood pressure measurement.
Details the process of taking a reading, including cuff inflation, deflation, and staying still.
Explains how to interpret results and how readings are automatically stored in memory.
Guidance on adjusting measurement for high systolic pressure readings (>220 mmHg).
Instructions on how to access previously stored blood pressure and pulse rate readings.
Procedure to delete all recorded measurement data from the monitor's memory.
To Next Page