14
HOW TO USE THE MEMORY FUNCTION
This monitor has a memory capable of storing 21 sets of readings each for A
and B User Selector. Every time you complete the measurement, the monitor
automatically stores blood pressure and pulse rate.
• Select the user to recall memory by the User Selector.
• Turn on the monitor by pressing ON/OFF button.
• Press the button to recall stored readings while the Heart
Symbol ( ) is displayed.
Press these two buttons
at the same time.
•To delete all the stored readings, press the button and the
START button simultaneously.
NOTE: You can not delete the stored readings partially.
Date and Time of stored readings
will be alternately displayed.
To Next Page
Loading...
