Why is my Omron IntelliSense IA1B showing no display when I press the START/STOP button?
If your Omron Blood Pressure Monitor's screen remains blank when you press the START/STOP button, the batteries are likely flat. You should replace the batteries to resolve this issue.
Why does my Omron Blood Pressure Monitor give different blood pressure readings each time?
Blood pressure readings can vary due to the time of measurement and your nervous condition. To get a more consistent reading with your Omron Blood Pressure Monitor, take deep breaths to relax before taking a measurement.
What to do if Omron Blood Pressure Monitor readings are too high or I cannot measure?
If you're having trouble measuring your blood pressure or the readings seem too high with your Omron Blood Pressure Monitor, make sure the cuff is attached correctly and wrapped firmly around your arm.
What to do if my Omron Blood Pressure Monitor indicates irregular or weak pulses?
If your Omron Blood Pressure Monitor indicates irregular or weak pulses, remove the arm cuff, wait 2 - 3 minutes, and then take another measurement, repeating the steps under "How to take a measurement" on page 16. If this error continues to appear, contact your doctor.
Explains warning symbols, prohibited actions, and compulsory actions.
Advises against self-diagnosis and using the unit on infants or for other purposes.
Cautions against bending cuff/tube, dropping unit, inflating without arm, and battery handling.
Identifies the display, buttons, and jacks of the main unit.
Details the meaning of various symbols shown on the display.
Lists the arm cuff, air tube, storage case, and batteries.
Instructions on preparing the arm and applying the cuff correctly.
Steps for taking a measurement and notes on rest time and usage.
Steps for installing and replacing the "AA" batteries.
Guide to setting the year, month, and day for the monitor.
Steps to set the hour and minutes for the monitor's clock.
Step-by-step instructions for correctly applying the arm cuff.
How to secure the cuff and notes on placement relative to the elbow.
Guidance on applying the cuff and taking measurements on the right arm.
Instructions on how to start and conduct a blood pressure measurement.
Details on reading display, turning off the unit, and important notes.
Explains the irregular heartbeat symbol and its implications.
Guidance for high systolic pressure readings.
Defines arrhythmia and advises consulting a doctor for diagnosis.
How to store and view up to 90 readings and average values.
How to view average readings and cycle through stored measurement values.
Instructions on how to delete all stored readings from the monitor.
Explains error symbols, their causes, and how to correct them.
Lists common issues like no display, high readings, and inconsistent readings with remedies.
Guidance on storing the monitor in its case and cleaning it.
Lists technical details like measurement range, accuracy, power source, and dimensions.
Measurement Specifications| pressure measurement range | 0 to 299 mmHg |
|---|---|
| pulse measurement range | 40-180/min |
| pressure accuracy | ±3mmHg or 2% of reading |
| pulse accuracy | ±5% of reading |
Power| power source | 4 “AA” batteries |
|---|---|
| battery life | Approx. 300 uses |
Operating Environment| operating temperature | 10°C to 40°C |
|---|---|
| operating humidity | 30 to 90% RH |
| storage temperature | -20°C to 60°C |
Weight and Dimensions| main unit weight | Approximately 355 g |
|---|---|
| main unit dimensions | Approx. 155 mm(l) x 84 mm(w) x 131 mm(h) |
| cuff size | Approximately 152 mm(w) Cuff tube 600 mm(l) |
To Next Page