Omron K3MA-J Series User Manual

13
K3MA-J
−
/
/ /
/
/
− −
− −
−
−
−
−
−
− −
/ /
/
/
−
−
−
−
Press Level
Key for
more than 3 s.
Press Level
Key for
more than 1 s.
Initial setting level
Input type
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
OUT2
type
Move to
advanced-
function
setting level
OUT1
type
Decimal
point
position
Scaling
display
value 2
Scaling
input value 2
Scaling
display
value 1
Scaling
input value 1
Press Level Key for more than 1 s.
Advanced-function
setting level
Enter
password
"-0169"
Parameter
initialization
Average
processing
OUT1
hysteresis
OUT2
hysteresis
Models with
the compar-
ative
output
function
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
Zero-limit
Zero-limit
value
Display
color
change
Display
auto-return
time
Move-to-
protect-
level time
Unit: times
Zero-limit
Green (red)
Green
Red (green)
Red
Unit: s
Unit: s
Upper Limit
Lower Limit
Upper/Lower
Limits
Upper Limit
Lower Limit
Upper/Lower
Limits
When zero-
limit is ON
To change a setting, press the Shift Key again, and then
make the change with the Up Key .

Omron K3MA-J Series Specifications

General

Input Type	Voltage, Current, Thermocouple, RTD
Accuracy	±0.3% FS ±1 digit
Sampling Period	0.5 s
Protection structure	Front panel: IP66
Control Output	Voltage
Alarm Output	Relay
Mounting	Panel mount
Communication	RS-485
Relay Output	250 VAC, 3 A (resistive load)
Power Supply Voltage	100 to 240 VAC, 50/60 Hz; 24 VAC, 50/60 Hz; 24 VDC
Humidity	35 to 85% RH (non-condensing)