Omron M1 Plus - Page 30

30
5.Handling Errors and Problems
Nothing happens when
you press the buttons.
The batteries are empty.
Replace the batteries with
new ones.
Refer to section 2.1.
The batteries have been
inserted incorrectly.
Insert the batteries with
the correct (+/ -) polarity.
Refer to section 2.1.
Other problems.
Press the I/O button and repeat measurement.
If the problem continues, try replacing the batteries
with new ones.
If this still does not solve the problem, contact your
OMRON retail outlet or distributor.
Problem Cause Remedy