EasyManuals Logo

Omron MC-720 User Manual

Omron MC-720
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
4
2. Preparation
2.1
Removing the Insulating Tape
When using the unit for the first time, pull the insulating tape
out of the battery compartment.
The unit is turned on and after 1 minute the room temperature
appears on the display.
Notes:
The room temperature remains on the display even after the unit turns off.
Place the unit on a level surface, in a place that is at room temperature (away from direct sunlight or air conditioning, etc.).
2.2
Switching between °C and °F
This unit is set in °C as default.
1.
While the room temperature is displayed, press and hold the START button.
2.
While holding it down, press and hold the ON/MEM
button until °F appears on the display with two beeps.
Notes:
To select °C mode again, start from step1.
When the unit is switched between °C and °F, all the readings stored in the
memory are deleted.
Back of the unit
MC-720-AP_A_M.book Page 4 Friday, May 22, 2015 11:01 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron MC-720 and is the answer not in the manual?

Omron MC-720 Specifications

General IconGeneral
ModelMC-720
TypeForehead Thermometer
Measurement TimeApproximately 1 second
Memory25 readings
Power Source1 x CR2032 battery
WeightApproximately 90g (including battery)
DisplayLCD
Operating Environment10°C to 40°C (50°F to 104°F), 30% to 85% RH
Battery LifeApproximately 2, 500 measurements
WaterproofNo
Automatic Shut-offYes, after approximately 1 minute of inactivity
Accuracy±0.2°C (±0.4°F) within 35.0°C to 42.0°C (95.0°F to 107.6°F)
Storage Environment-20°C to +60°C (-4°F to +140°F), 10% to 95% RH

Related product manuals