11
EN
4. Troubleshooting and Maintenance
4.1
The Icons and Error Messages
Error Display Cause Remedy
Battery is low.
Replace the battery.
(Refer to section 4.4)
Taking measurement before unit stabilizes.
Wait until the “ ” icon stops flashing.
The unit is showing a rapid ambient temperature
change.
Allow the unit to rest in a room for at least
30 minutes at room temperature: 10°C–40°C
(50°F–104°F).
The ambient temperature is not within the range
between 10°C–40°C (50°F–104°F).
Allow the unit to rest in a room for at least
30 minutes at room temperature: 10°C–40°C
(50°F–104°F).
Errors 5–9 indicate a malfunction of the unit.
Remove the battery, wait for 1 minute, reinsert the
battery, and turn on the unit again. If the message
reappears, please contact the OMRON
representative.
MC-720-AP_A_M.book Page 11 Friday, May 22, 2015 11:01 AM
To Next Page
Loading...
