EasyManuals Logo

Omron MC-720 User Manual

Omron MC-720
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
6
3. Using the Unit
3.1
Taking a Reading
Forehead Measurement Mode
This mode displays the oral-equivalent value of the measured forehead temperature.
Always make sure the probe lens is clean and undamaged, and the forehead is clean with no sweat, cosmetics,
scars, etc.
Prior to measurement, ensure that the patient has not taken a bath or exercised within the last 30 minutes, and
has remained in a stable environment for at least 5 minutes.
It is recommended to perform measurement three times. If the three measurements are different, select the
highest temperature.
1. Pull off the probe lens cap to remove it.
2. Press the ON/MEM button.
All indicators appear on the display for 1 second.
Then the display shown on the far right appears with two beeps.
MC-720-AP_A_M.book Page 6 Friday, May 22, 2015 11:01 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron MC-720 and is the answer not in the manual?

Omron MC-720 Specifications

General IconGeneral
ModelMC-720
TypeForehead Thermometer
Measurement TimeApproximately 1 second
Memory25 readings
Power Source1 x CR2032 battery
WeightApproximately 90g (including battery)
DisplayLCD
Operating Environment10°C to 40°C (50°F to 104°F), 30% to 85% RH
Battery LifeApproximately 2, 500 measurements
WaterproofNo
Automatic Shut-offYes, after approximately 1 minute of inactivity
Accuracy±0.2°C (±0.4°F) within 35.0°C to 42.0°C (95.0°F to 107.6°F)
Storage Environment-20°C to +60°C (-4°F to +140°F), 10% to 95% RH

Related product manuals