2. Preparation
5
EN
2.3
Setting the Buzzer
The buzzer is activated by default, but can be deactivated.
Note: The buzzer is only available in forehead measurement mode.
1. Press the ON/MEM button to turn on the unit.
2. Press and hold the ON/MEM button for 3 seconds.
The " " icon flashes on the display.
3. Release the ON/MEM button.
The " " icon remains lit and the buzzer is deactivated.
Notes:
• If the ON/MEM button is pressed down for more than 5 seconds after the " " icon starts
flashing, the unit turns off without deactivating the buzzer.
• To activate the buzzer again, start from step1.
MC-720-AP_A_M.book Page 5 Friday, May 22, 2015 11:01 AM
To Next Page
Loading...
