Machine Automation Controller NX1
27
*1. Inline ST is supported. (Inline ST is ST that is written as an element in a ladder diagram.)
*2. When connected to a CPU rack.
*3. Minimum value fulfills all these conditions.
• Larger than 5 ms
• Constant number multiple of primary periodic task cycle
Backing up
data
SD Memory
Card backups
Operating
methods
CPU Unit front-panel
DIP switch
You can perform backup, verification, and restoration operations by manipulating
the front-panel DIP switch on the CPU Unit
Specification with
system-defined
variables
You can perform backup, verification, and restoration operations by manipulating
system-defined variables
SD Memory Card
Window in Sysmac
Studio
Backup and verification operations are performed from the SD Memory Card Win-
dow of the Sysmac Studio
Special instruction The special instruction is used to backup data
Protection
Disabling backups to
SD Memory Cards
Backing up data to a SD Memory Card is prohibited
Safety Unit Restore from SD Memory Card
Restores the data of the Safety CPU Unit using the front-panel DIP switch on the
Safety CPU Unit and SD Memory Card
Sysmac Studio Controller backups The Sysmac Studio is used to backup, restore, or verify controller data
Item NX102
To Next Page
Loading...
