12
EN
ASSEMBLY STEPS
Before using your unit, inspect these things.
1. Cord is not broken.
2. Pad gel is not damaged.
3. Electrode cord connection is not broken.
4. Unit is intact and working.
5. There is no battery leakage.
STEP 1 INSERT BATTERIES
1 Remove the battery cover using a hard object (such as the tip
of a pen, thin screwdriver).
Battery Cover
2 Insert batteries and then install the battery cover. (Make sure
the signs correspond when inserting batteries).
STEP 2 ATTACH ELECTRODE CORD
TO THE MAIN UNIT
Attach the electrode cord plug to the bottom
of the main unit.
OPERATING INSTRUCTIONS
To Next Page
Loading...
