19
3. Check the measurement results.
The monitor automatically stores blood
pressure and pulse rate into its memory.
Refer to “How to Use the Memory
Function” on page 21.
NOTES:
• Self-diagnosis of measured results and treatment are dangerous.
Please follow the instructions of your doctor.
• If an error symbol “E” or “EE” appears, measurement was not
completed successfully. Refer to “Error Indicator” on page 27.
• Wait 2-3 minutes before taking another blood pressure measurement.
Waiting between readings allows the arteries to return to the
condition prior to taking the blood pressure measurement.
4. Remove the arm cuff.
5. Press the START/STOP button to turn the monitor off.
NOTE: If you forget to turn the monitor off, it will automatically shut
itself off after five minutes.
HOW TO TAKE A MEASUREMENT
Systolic Blood
Pressure
Pulse Display
Diastolic Blood
Pressure
Guide to Blood Pressure Levels
Recent research suggests that the following values can be used as a
guide to high blood pressure for measurements taken at home.
Systolic Blood Pressure: Above 135 mmHg
Diastolic Blood Pressure: Above 85 mmHg
Use these figures as a guide.
* Consult your doctor if necessary.
To Next Page
Loading...
Need help?
General
