Omron Sti F3SJ-B P25-02TS Series - 4. Function Selection Flow Chart; 5. Wiring Examples; 5-1. EDM not used, auto reset mode, external test used, muting function not used, PNP output

3
F3SJ-B-02TS
Quick Installation Manual
4. Function Selection Flow Chart
Required system configuration depends on functions to be used. Use the following flow chart to determine
the system.
For configuration to use the muting function, refer to F3SJ-B-02TS series user's manual.
Using Muting Function Basic System
Muting System *1
NO
YES
*1 Muting Key Cap (F39-CN10) is necessary.
Mounting/Beam Alignment Wiring
Function Selection
Pre-Operation Checklist /
Maintenance Checklists