Omron SYSMAC C200H User Manual

17
ranges for thermocouple input: 11 for type K (CA) sensors, and 4 for type L
(Fe-CuNi) sensors. The C200H-TS101 offers 11 ranges for platinum-RTD
(JPt) input. The C200H-TS102 offers 11 ranges for platinum-RTD (PT) input.
A separate code number from 00 through 25 is assigned to each Tempera-
ture Sensor/range specification.
C200H-TS001/002
Temperature- Thermocouple
sensing element K (CA): chromel-alumel J (IC):iron-
constantan/
L (Fe-CuNi)
Measuring unit
°C °F °C
Measurement
range
1600
1000
800
600
500
400
300
200
150
100
80
50
0
Temperature
specification code
(2-digit BCD)
00 01 02 05 06 07 08 09 10 11 12 13 1403 04
C200H-TS101/102
Temperature Platinum RTD
sensing element
JPt 100 Ω/Pt 100 Ω
Measuring unit
°C °F
Measuring
range
500
400
300
200
150
100
80
50
0
-20
-50
Temperature
specification code
(2-digit BCD)
15 16 17 18 21 22 23 24 2519 20
Programming Example In this example, the temperature specification code of the temperature sens-
ing element is programmed. For this example a thermocouple K (CA), 0°
through 800°C (Code 07) is used, and the Temperature Sensor Unit is set to
0.
Temperature Specification Settings Section 4-1

Omron SYSMAC C200H Specifications

General

PLC Type	Modular
Operating Temperature	0 to 55°C
Programming Language	Ladder logic
Data Memory	512 words
Communication Ports	RS-232C
Humidity	10 to 90% RH (non-condensing)
Supply Voltage	100 to 120 VAC, 200 to 240 VAC, 24 VDC (depending on the power supply unit)