Omron TL-W Series - User Manual

Flat Inductive Proximity Sensor
TL-W
Standard Flat Sensors in
Many Different Variations
■ Only 6 mm thick yet provides a sensing
distance of 3 mm (TL-W3MC1).
■ Aluminum die-cast models also available.
Be sure to read Safety Precautions on
page 7.
Ordering Information
DC 2-Wire Models
DC 3-Wire Models
*1. Models with a different frequency are also available to prevent mutual interference. The model numbers are TL-W@M@@5 (e.g., TL-W5MD15).
*2. Models with robotics cables are also available. The model numbers are TL-W@MC1-R (e.g., TL-W1R5MC1-R).
Appearance Sensing distance
Model
Operation mode
NO NC
TL-W5MD1 *1 TL-W5MD2 *1
Appearance Sensing distance Output configuration
Model
Operation mode
NO NC
DC 3-wire, NPN
TL-W1R5MC1 ---
TL-W3MC1 TL-W3MC2
TL-W5MC1 TL-W5MC2
TL-W20ME1 TL-W20ME2
DC 3-wire, NPN TL-W5E1 TL-W5E2
DC 3-wire, PNP TL-W5F1 TL-W5F2
Unshielded
5 mm
Unshielded
1.5 mm
*1
*2
3 mm
*1
*2
5 mm
*1
*2
20 mm
*1 *1
Shielded
5 mm
http://www.ia.omron.com/
1
(c)Copyright OMRON Corporation 2007 All Rights Reserved.

Omron TL-W Series Specifications