What to do if Omron Security Sensors are in lockout state?
If your Omron Security Sensors are in a lockout state, first identify and resolve the underlying issue that triggered the lockout. Once the problem is resolved, you can restart the F3SJ by cycling the power or providing a reset input.
General| Type | Safety Light Curtain |
|---|---|
| Safety Category | Category 4 |
| Protection Rating | IP67 |
| SIL | SIL3 |
| Operating Temperature | -10°C to +55°C |
| Detection Method | Infrared |
| Resolution | 14 mm |
| IP Rating | IP67 |
| Certification | CE |
| Power Supply Voltage | 24 VDC ±10% |
Describes how to implement start and restart interlock functions for machine safety.
Details the muting function for temporarily disabling safety features for workpiece passage.
Allows disabling specific beams in the detection zone to ignore fixed objects.
Enlarges detection capability to allow objects of certain sizes or multiple interruptions.
Explains how to configure muting modes and parameters for workpiece passage.
Provides access to error history, power-on time, and load switching frequency data.
Describes how to reset F3SJ settings to factory defaults or previous configurations.
Explains how to calculate and ensure safety distance according to ISO 13855 and ANSI B11.19.
Lists critical safety precautions for electrical wiring and connections.
Specifies requirements for the DC power supply unit to ensure F3SJ compliance.
Ensures correct installation, wiring, and basic function verification before operating the F3SJ.
Details steps to verify F3SJ operation and safety functions when the machine is stopped.
Verifies that hazardous machine parts stop correctly when the F3SJ is triggered or powered off.
Provides guidelines for periodic inspections and checks to maintain F3SJ safety.
Provides solutions for common errors, lockout states, and operational problems.
Lists common lockout states, their causes, and solutions for F3SJ errors.
Provides troubleshooting steps for issues that do not result in a lockout state.
To Next Page