23
F3SJ-A
User’s Manual
Chapter1 Compatibility with former version
Overview and Specifications
E
Compatibility with former version
Shown below is a table of compatibility of this version (Ver.2) with former one (Ver.1)
* To use Ver.1 and Ver.2.0(or Ver.2.1) sensors in combination, setting of Ver.1 F3SJ must be changed. For a rental console dedicated to
setting change, contact Omron's sales representative.
You can check a label on your F3SJ for its version as shown below.
Version can be identified by label background color. (Ver.1: White, Ver.2: Yellow)
Compatibility
Combination of Ver.1 emitter (receiver) and Ver.2 receiver (emitter) Available, but the system operates as a system of Ver.1 sensors. *
Series connection of heterogeneous combination of Ver.1 and
Ver.2 sensors
Available, but the system operates as a system of Ver.1 sensors. *
Product upgrade from Ver.1 to Ver.2 Upgrade is unavailable
Year :
Serial No. : Version :
OMRON Corporation Kyoto, JAPAN
Location of the label describing the F3SJ version
Emitter
Receiver
Enlarged view of area enclosed by dotted line
: Serial No.
: Year of manufacture
: F3SJ version
To Next Page
Loading...
