Omron F3SJ Series - List of Functions that Can be Changed by the Setting Tool

59
F3SJ-A
User’s Manual
Chapter3 Using the Setting Tool
What can be done by the setting tool
E
 List of Functions that Can Be Changed by the Setting Tool
: Available
–: Unavailable
*1 New functions added for Version 2. They can be enabled by the setting tool and their settings can
be read by the tool.
*2 Available without using the setting tool. Finer functional setting can be done by the setting tool. For
these functions, see Chapter 2.
Function/Monitor Item
Setting Console PC Tool for F3SJ
F39-MC21 F39-GWUM
Setting Adjusted to Application Fixed Blanking Function *1 
Floating Blanking Function *1 
Warning Zone Function *1 
Muting Function
(For muting system)
*2 
Override Function
(For muting system)
*2 
Indicator/Input & Output Setting Auxiliary Output *2 
Designated Beam Output Function *1 – 
External Indicator Output *2 
Interlock Function *2 
External Device Monitoring Function *2 
Operating Range Change Operating Range Change Function *1 
Operation Monitoring Incident Light Level Display *1 
Disturbance Light Level Display *1 
Status Information Display *1 – 
Maintenance Information Error History *1 
Power-on Time *1 
Load Switching Frequency *1 
Setting Recovery Setting Recovery Function *1 
Other Safety Distance Calculation Function *1 – 
Connection Cable Length Calculation
Function
*1 – 
Rated Response Time Check *1 