Omron F3SJ Series User Manual

12
Chapter1 Indicator Display Patterns
F3SJ-A
User’s Manual
Overview and Specifications
 Internal Indicator for Muting System
Shown below are internal indicator statuses while the keycap for muting is being attached.
For an explanation of terminology such as function names, refer to the glossary.
Glossary p.196
7 OFF-state indicator OFF ON Turns ON when safety outputs are OFF.
Blinking Blinks at following states:
- Lockout state
- One or more beams are blocked during the maintenance status
8 ON-state indicator ON ON Turns ON when safety outputs are ON.
Blinking Blinks when no beams are blocked during the maintenance
status
9– – – –
10 – – – –
No. Indicators
ON/
Blinking
Description
1 Incident light level
indicator
LEVEL-1 to 5 ON Indication status of LEVEL-1 to 5 shows the incident light level
status of the F3SJ.
2 Error mode indicator ERROR-A to C ON/
Blinking
Turns ON or blinks only when the F3SJ enters lockout, and the
cause of the error is indicated by the status of ERROR-A to C
indicators.When F3SJ are series-connected, the error mode
indicator lamps turn ON or blink according to the details of each
error. Affix the error mode label (included) near the F3SJ to
allow for quick troubleshooting when errors occur. For details of
the error mode, see "Chapter 7 Troubleshooting".
3 Power indicator POWER ON Turns ON while the power is ON.
Blinking Blinks during maintenance status.
4 Interlock indicator INTLK ON Turns ON when F3SJ is in interlock state.
Blinking Blinks when in lockout.
5 Muting input 1 indicator MUTE1 ON Turns ON when an input is given to muting input 1.
Blinking Blinks during muting/override.
6 Muting input 2 indicator MUTE2 ON Turns ON when an input is given to muting input 2.
Blinking Blinks during muting/override.
7 OFF-state indicator OFF ON Turns ON when safety outputs are OFF.
Blinking Blinks at following states:
- Lockout state
- One or more beams are blocked during the maintenance status
8 ON-state indicator ON ON Turns ON when safety outputs are ON.
Blinking Blinks when no beams are blocked during the maintenance
status
9 Muting error indicator MUTING
ERROR
ON Turns ON when a muting error occurs.
10 Blanking/Test indicator BLANKING/
TEST
ON Turns ON when the blanking function is enabled.
Blinking Blinks when external test is being performed.
No. Indicators
ON/
Blinking
Description

Omron F3SJ Series Specifications

General

Type	Safety Light Curtain
Safety Category	Category 4
Protection Rating	IP67
SIL	SIL3
Operating Temperature	-10°C to +55°C
Detection Method	Infrared
Resolution	14 mm
IP Rating	IP67
Certification	CE
Power Supply Voltage	24 VDC ±10%