201
F3SJ-A
User’s Manual
Chapter7 Related Standards
Appendix
E
• ANSI B11.13:1992(R1998) Single- and multiple-spindle automatic bar and chucking machines
• ANSI B11.14:1996 Coil slitting machines/systems
• ANSI B11.15:2001 Pipe, tube, and shape bending machines
• ANSI B11.16:2003 Metal powder compacting presses
• ANSI B11.17:2004 Horizontal hydraulic extrusion presses
• ANSI B11.18:1997 Machines and machinery systems for processing strip, sheet or plate from coiled
configuration
• ANSI B11.19:2003 Performance criteria for the design, construction, care, and operation of safeguarding
when referenced by the other B11 machine tool safety standards
• ANSI/RIA 15.06:1999 Industrial robots & robot systems safety requirements
• UL1998:1998 Safety-related software
• UL508:1999 Industrial control equipment
• UL61496-1:2002 Electro-sensitive protective equipment - Part 1: General requirements and tests
• UL61496-2:2002 Electro-sensitive protective equipment - Part 2: Particular requirements for active opto-
electronic protective devices
Canadian Standards
• CAN/CSA C22.2 No.14-05 Industrial control equipment
• CAN/CSA C22.2 No.08-M1986(R2003) Electronics integrated safety functions
• CSA Z142-02 Code for power press operation: Health, safety, and guarding requirements
• CSA Z432-04 Safeguarding of machinery
• CCSA Z434-03 Industrial robots and robot systems : General safety requirements
SEMI Standards
• SEMI S2-0703 Environmental, health, and safety guideline for semiconductor manufacturing equipment
JIS Standards
• JIS B 9704-1:2006 Safety of machinery - Electro-sensitive protective equipment - Part 1 : General
requirements and tests
• JIS B 9704-2:2008 Safety of machinery - Electro-sensitive protective equipment - Part 2 : Particular
requirements for equipment using active opto-electronic protective devices
To Next Page
Loading...
Need help?
General
