Omron TM5-700

The dedicated “Pneumatic Gripper”
software allows for a single node to
arbitrarily set the digital I/O setting,
the time-out period for the gripper
open/close, and the standby time
after gripper open/close.
Mountable on robots in just 5 minutes
Reduced teaching time
Wiring connector
Robot flange
3
1
2
- Through the adoption of a robot flange
common to the entire series, changeover
can be done simply by replacing the gripper.
- The simple gripper design enables
replacement without tools: just turn the
clamp ring by hand.
Enables gripper replacement without tools
1
Mount dedicated ange on the robot
2
Turn the clamp ring to mount gripper
3
Connect the wiring connector
Mounting complete!
Indicator lamp visualizing 360°
Round shape with no protrusions or
edges
Easy setting of nger open/close by
switching directional control valve
*
and
gripping power by adjusting regulator
*
Grip speed easily adjustable
with speed adjustment knob
Air drive realizes high gripping
power while being lightweight
* Option
TECHMAN/OMRON ROBOT
Certied Grippers
Compatible with
TM5-700/TM5-900/TM12/TM14