Need help?Do you have a question about the Omron TM and is the answer not in the manual?
General| Degrees of Freedom | 6 |
|---|---|
| Protection Degree | IP54 |
| Reach | 900 mm |
| Power Supply | AC 200-240V, 50/60 Hz |
| Operating Temperature | 0 to 40°C |
| Mounting | Floor, Wall, Ceiling |
| Model | TM Series |
| Power Consumption | Approx. 0.8 kW |
Lists recommended documents for TM Flow software and initial startup.
Steps to perform a backup operation on the TM robot, including interface details.
Suggests optimal times to create backup points for the robot system.
Details the screen and steps for restoring the robot from a backup file.
Instructions to initiate the format process for a USB flash drive using Windows Explorer.
Specifies the required file system, volume label, and quick format option.
Describes warning messages and confirmation of successful USB drive formatting.
Outlines the required folder naming convention for the USB drive.
Lists the files typically included in the TM Flow update package on the USB drive.
Shows the System Setting menu, highlighting the 'System Update' option.
Displays the screen shown when the system recognizes the TM Flow file for update.
Explains the warning message if TM Flow versions mismatch between robot and device.
To Next Page
