Omron TM Collaborative Robot: Backup, Restore, Update – Ver. 1 Page 4 of 9
Figure 3.2 - Backup Screen
2. The following will be backed up:
a. Firmware
b. Projects
c. Settings – TCP's, robot parameters, etc.
A maximum of three backup points are allowed. To delete a backup point, click on the Restore button
and then click the delete button, marked by an X in a red box.
3.2 Recommended Backup Points
Since only 3 backup points are allowed, therefore the ADE team’s suggested backup points are:
1. Upon initial setup (to retain a copy of the factory default settings).
2. After commissioning is complete.
3. Before updating to a new version of the firmware or before trying anything irreversible.
To Next Page
Loading...
